Ronseal One Coat All Surface Primer and Undercoat

A versatile primer and undercoat that works on just about any surface, including metal, tiles, brick, stone, MDF, plastic and glass. It requires minimal preparation and covers bold colours effectively in one coat.

• For most surfaces including tiles, ceramic, melamine, cupboards, MDF, wood, metal, uPVC, plastic, glass and brick
• Not recommended for stainless steel, brass, rusty metal, floors or worktops
• Coverage: up to 12 m² per litre
• Dry time: touch dry in 30 minutes, paint over in 2 hours
• Recoat time: 2 hours
• Recommended coats: 1
• Finish: matt
• Application: brush
• Base: water

Preparation: Apply to clean, dry, sound timber. Remove dirt, mould, algae, grease and any flaking or peeling coatings before use, and make sure the surface is dry.

Application: Stir thoroughly and apply by brush. One coat is usually enough before top-coating.

Maintenance: Top-coat with a suitable paint once fully dry.

Colour: White

Size: 250ml, 750ml, 2.5L

Select your required option above before adding the product to your basket.

Always check the product label and manufacturer's instructions before use.

Coverage, drying times and the number of coats required may vary depending on the product, timber condition and application method.

Need advice before ordering? Call 01952 585740 .

Collection: Collection is available from A.K. Williams.

Local delivery: Local delivery is available subject to order size and delivery location.

For delivery enquiries call 01952 585740 .